Security+ 4-Week Study Plan: Daily Schedule (701 and 801)

By Prostutii Editorial • Last Verified: 2026-11-18
⚡Direct Answer / Summary
This 4-week Security+ study plan assumes 8 to 10 hours a week, about 36 hours in total. Spend weeks 1 to 3 learning the five domains in proportion to their exam weights, then use week 4 for timed practice, weak-spot review and exam-day preparation. It works for SY0-701 and SY0-801, with hour adjustments for each.

Last verified: November 18, 2026, against CompTIA’s Security+ V7 and Security+ V8 pages. This plan is independent guidance, not an official CompTIA schedule.

A good study plan does three things: it covers every domain, it spends time in proportion to how much each domain is worth on the exam, and it builds in checkpoints so you find gaps early. This plan gives you a day-by-day schedule for four weeks, a lighter eight-week version, and an exam-day checklist. If you have not chosen an exam version yet, start with our SY0-701 vs SY0-801 guide or the decision calculator.

Key takeaways
✦ The plan uses about 36 hours: 27 hours of learning across three weeks, then 9 hours of review and practice.
✦ Time per domain follows the official weights, so Security Operations gets the most and the smallest domain gets the least.
✦ Each week ends with a checkpoint. Log your misses by topic and fix them before moving on.
✦ Week 4 introduces no new topics. It is for timed practice, weak spots and logistics.
✦ Complete beginners should use the eight-week version, or build networking basics first.

Is a 4-week plan right for you?

This plan assumes you can study 8 to 10 hours a week, which works out to about 36 hours over four weeks. For perspective, CompTIA’s V8 page estimates 25 to 40 hours for its CertMaster Learn course and 10 to 20 hours for CertMaster Practice. At roughly 36 hours, this plan sits at the low end of that range for learning plus practice, so it suits people who already have some IT or networking background. CompTIA lists a security administrator with two years of hands-on experience as the recommended profile for SY0-801.

Who should NOT use a 4-week plan.
If you are a complete beginner with no IT background, or you cannot study at least 8 hours a week, four weeks is likely too fast. Use the eight-week version below, add time for networking basics such as IP addressing, DNS and common ports, and rely on your practice scores, not the calendar, to decide when to book your exam.

How to split your time by domain

The first three weeks hold 27 hours of learning. The table splits them in proportion to the official domain weights from CompTIA’s published summaries, rounded to the nearest half hour. Checkpoint time comes out of each Saturday block, so treat the hours as approximate.

DomainSY0-701 weightSY0-801 weightHours (701)Hours (801)
1. General Security Concepts12%16%34.5
2. Threats, Vulnerabilities, and Mitigations (701) / Attacks (801)22%24%66.5
3. Security Architecture18%19%55
4. Security Operations28%27%7.57
5. Security Program Management and Oversight20%14%5.54
Total100%100%2727

Adjusting the schedule for your exam version

The daily schedule below follows the SY0-801 split. If you are taking SY0-701, make these small shifts:

  • Spend about 1.5 fewer hours on Domain 1 in week 1, since it carries 12% instead of 16%.
  • Replace the 30-minute AI risk block in week 2 with mitigation techniques, which sit in the threats domain on SY0-701.
  • Add about 1.5 hours of governance and risk in week 3, since Domain 5 carries 20% on SY0-701.

If you are taking SY0-801, add time on the new AI topics using our SY0-801 AI security scenarios. If you already studied for SY0-701, see the upgrade guide for a short bridge instead of restarting.

Week 1: Foundations and the threat landscape

Cover General Security Concepts and start Threats, Vulnerabilities, and Attacks.

DayTimeFocusOutput
Monday1.5 hSecurity control categories and types; CIA, AAA and zero trustA one-page grid of control categories against control types
Tuesday1.5 hChange management; hashing, symmetric and asymmetric encryptionNotes on when to use each, in your own words
Wednesday1.5 hPKI, certificates, digital signatures and key managementA diagram of how a certificate is issued and checked
Thursday1.5 hThreat actors and motivations; threat vectors and attack surfacesA table of actor types and their usual motives
FridayRestRest, or 20 minutes of flashcardsNone
Saturday3 hSocial engineering, malware and indicators of malicious activity, then the checkpointA list of the indicators you could not explain
SundayRestRest or catch up on anything you skippedNone
Checkpoint: Take the General Security Concepts practice set (20 questions, about 25 minutes) and log your misses by topic.

Week 2: Vulnerabilities, architecture and early operations

Finish Domain 2, cover Security Architecture, and begin Security Operations.

DayTimeFocusOutput
Monday1.5 hVulnerability types, supply chain risk and misconfiguration; CVE and CVSSExamples sorted into software flaws, configuration weaknesses and third-party risk
Tuesday1.5 hAI security risks (30 minutes), then architecture models: cloud, hybrid, on-premises, IoT and OTA table of risks for each architecture model
Wednesday1.5 hEnterprise infrastructure: segmentation, firewalls, IDS and IPS, VPNs and secure communicationsA network sketch labeling zones and controls
Thursday1.5 hData protection (classification, data states, DLP) and resilience (backups, redundancy, RTO, RPO, BCP and DR)Three worked RTO and RPO examples
FridayRestRest, or 20 minutes of flashcardsNone
Saturday3 hResilience testing (1 h), secure computing resources and asset management (1 h), incident response phases (1 h), then the checkpointA one-page incident response flow
SundayRestRest or catch upNone
Checkpoint: Take the Threats and Vulnerabilities practice set (20 questions, including log excerpts) and log your misses by topic.

Week 3: Security operations and governance

Cover Security Operations and Security Program Management and Oversight.

DayTimeFocusOutput
Monday1.5 hVulnerability management and mitigation: identify, prioritize, remediate, validateOne vulnerability triage example written end to end
Tuesday1.5 hMonitoring and alerting; logs and SIEM; data sources that support investigationsThree sample log excerpts, each with the pattern named
Wednesday1.5 hIdentity and access: authentication, authorization, SSO, federation, PAM and access control modelsA table comparing RBAC, ABAC, MAC and DAC
Thursday1.5 hAutomation and orchestration (30 minutes), then governance: policies, standards and procedures (1 h)A one-page governance hierarchy
FridayRestRest, or 20 minutes of flashcardsNone
Saturday3 hRisk management (ALE = SLE × ARO), third-party risk, compliance and privacy, audits and assessments, awareness, then the checkpointA list of formulas and agreements (SLA, MOU, MSA, SOW, NDA)
SundayRestRest or catch upNone
Checkpoint: Redo every question you missed in the two practice sets, then spend 30 minutes on the ports and acronyms flashcards.

Week 4: Review and exam readiness

Close gaps, practice under time pressure and prepare for exam day. Do not start new topics.

DayTimeFocusOutput
Monday1.5 hReview your weakest domain, plus ports and acronyms flashcardsA shortened list of weak topics
Tuesday1.5 hReview your second-weakest domain, then performance-based question practiceTwo PBQ-style tasks solved and explained
Wednesday1.5 hFirst timed practice exam: up to 90 questions in 90 minutes from a reputable exam-style sourceA score by domain
Thursday1.5 hReview every miss from Wednesday by domain; redo the confused-pairs tableA final list of weak points
Friday0.5 hLight flashcards onlyNone
Saturday2.5 hSecond timed practice exam (or 60 questions in 60 minutes), fix last gaps, prepare exam-day logisticsA completed exam-day checklist
SundayRestRest. Stop studying new material.None
Checkpoint: Aim to see your practice scores stable across two exams before you book or sit the real one. CompTIA does not publish a readiness score, so treat this as a personal signal.
How to run a checkpoint.
1. Time yourself, about one minute per question.
2. Read every explanation, including for questions you got right.
3. Log each miss by topic, not by question number.
4. If you score under 15 out of 20, spend your next session on the weak topics before moving on.

Use our practice sets for the first two checkpoints: General Security Concepts and Threats and vulnerabilities. For vocabulary, use the acronyms and ports cheat sheet. For performance-based questions, see the PBQ guide.

The lighter 8-week version

If four to five hours a week fits your life better, spread the same 36 hours over eight weeks. Beginners can raise this to about six hours a week, which adds up to roughly 48 hours.

WeekFocusCheckpoint
1Domain 1, first half: controls, CIA, AAA, zero trust, change management10 questions on these topics
2Domain 1, second half: cryptography, PKI, certificates, key managementGeneral Security Concepts practice set
3Domain 2, part 1: threat actors, vectors, social engineering, malware10 questions on these topics
4Domain 2, part 2: vulnerabilities, indicators and logs, AI risks (SY0-801)Threats and vulnerabilities practice set
5Domain 3: architecture models, infrastructure, data protection, resilienceRedo missed questions
6Domain 4, part 1: hardening, asset management, vulnerability management, monitoring, identityFlashcards plus 10 new questions
7Domain 4, part 2: incident response, automation; then Domain 5 governance, risk, complianceRedo missed questions
8Review, timed practice exams, PBQ practice, exam-day checklistTwo timed practice exams

Study resources to pair with this plan

Use the official objectives as your checklist, then pick one primary learning resource and one practice source. Whatever you buy, check that it says it targets your exam version.

ResourceBest forCompTIA’s estimated time
Official SY0-801 exam objectives (PDF)Your checklist of what is testedFree
CertMaster LearnFoundational knowledge with simulated labs25 to 40 hours
CertMaster PerformComprehensive learning with live virtual machine labs30 to 60 hours
CertMaster PracticeTimed practice exams and objective mastery scores10 to 20 hours
CertMaster LabsHands-on practice in a live virtual lab15 to 25 hours
NIST and CISAFree standards and guidance for risk, incident response and threatsAs needed

The CertMaster details above come from CompTIA’s V8 page, and product availability for each exam version can differ, so confirm the product matches the version you are taking. Prostutii is not affiliated with CompTIA, and we do not recommend exam dumps or “braindump” sites. They are against CompTIA’s rules and teach answers instead of understanding.

Exam-day checklist

The real exam has a maximum of 90 questions in 90 minutes, a mix of multiple-choice and performance-based questions, and a passing score of 750 on a scale of 100 to 900. Use this list on the final weekend and the morning of your exam.

  1. Confirm the details. Check your appointment time, location or online-session instructions, and the ID your provider requires. Names must match your registration.
  2. Do logistics early. Plan your route and arrival time, or, if you test remotely, run the provider’s system and room checks in advance.
  3. Stop new material. The day before, do a light flashcard pass and sleep well. New topics at night rarely stick.
  4. Eat and hydrate. A steady morning beats a cramped last-minute review.
  5. Pace yourself. Aim for about one minute per question. Flag hard questions, move on, and return if time remains.
  6. Read for the deciding detail. Look for words such as BEST, FIRST and MOST, and eliminate options that are true but do not answer the question.
  7. Use your review time. If you finish early, revisit flagged questions rather than changing answers at random.
How we built this plan. The domain weights, exam format and CertMaster time estimates come from CompTIA’s published Security+ pages, checked on November 18, 2026. The daily schedule, hour allocation and readiness advice are our editorial suggestions for a learner with some IT background, not CompTIA guidance.

Prostutii is an independent study resource and is not affiliated with or endorsed by CompTIA. Security+ is a trademark of CompTIA. Sources: CompTIA Security+ V7, CompTIA Security+ V8.